ST635: The SmartMount Universal Tilt Wall Mount supports virtually any 13" to 32" flat panel screen. The tilting wall plate keeps the screen close to the wall for a very discreet installation that is perfect for digital signage, POS stations, or office applications. Featuring one-touch tilt, the SmartMount allows the screen to be tilted +15/-5 degrees without the use of tools. For a quick and easy installation it may be mounted to a single wood stud or concrete. Metal stud mounting is possible with accessory metal stud fasteners. Compatible with VESA 75mm, 100mm, 200mm, and 200mm x 200mm mounting hole patterns.
What is VESA?
VESA (Video Electronics Standards Association) is a Flat Panel Monitor Physical Mounting Interface Standard (FPMPMI). Most manufacturers comply with this standardized and industry wide “hole pattern” on the back of their displays for mounting purposes. A typical VESA hole pattern for displays can be one of three sizes:
75 mm x 75 mm (75 mm = 3 inches)
100 mm x 100 mm (100mm = 4 inches)
200 mm x 200 mm (200 mm = 8 inches)
In order to assure mount compliance with your selected display please measure the vertical and horizontal center line distance between hole pattern. This measurement should conform to either of the dimensions described above. If the measurement is outside of these guide lines an alternative adaptor plate may be required. For assistance please call our sales department at 1-800-314-8955.
Note: Any non-VESA standard screen will require a custom PLP or LC series adapter plate. Please call us at 1-800-314-8955 if you require an adapter plate or if you have compatibility questions.
| Toll Free: 888-880-1659 (M-F 9am-6pm)
