Extended Depth From Wall: 6.52"
Compressed Depth From Wall: 2.15"
SP730P The SmartMount Long Pivot Wall Mount supports 10" to 22" LCD screens and is ideal for obtaining side-to-side rotation and upward/downward tilt. Its anodized aluminum finish elegantly complements offices, conference rooms, merchandising displays, hotel rooms or any room in the home. The enhanced ball joint design at the screen allows the user to smoothly turn the screen in the desired position for comfortable viewing. Ships pre-assembled for fast and easy installation.
What is VESA?
VESA (Video Electronics Standards Association) is a Flat Panel Monitor Physical Mounting Interface Standard (FPMPMI). Most manufacturers comply with this standardized and industry wide “hole pattern” on the back of their displays for mounting purposes. A typical VESA hole pattern for displays can be one of three sizes:
75 mm x 75 mm (75 mm = 3 inches)
100 mm x 100 mm (100mm = 4 inches)
200 mm x 200 mm (200 mm = 8 inches)
In order to assure mount compliance with your selected display please measure the vertical and horizontal center line distance between hole pattern. This measurement should conform to either of the dimensions described above. If the measurement is outside of these guide lines an alternative adaptor plate may be required. For assistance please call our sales department at 1-800-314-8955.
Note: Any non-VESA standard screen will require a custom PLP or LC series adapter plate. Please call us at 1-800-314-8955 if you require an adapter plate or if you have compatibility questions.
| Toll Free: 888-880-1659 (M-F 9am-6pm)
