Extended Depth From Wall: 19.97"
Compressed Depth From Wall: 2.75"
SA740P The Articulating LCD Wall Arm supports 22" to 37" LCD screens. With internal cord management this mount folds flat against the wall or extends out up to 20". Its anodized aluminum finish elegantly complements offices, conference rooms, merchandising displays, hotel rooms or any room in the home. This two-link arm provides easy one-touch tilt and up to 180 degrees of swivel for virtually limitless viewing positions. Unsightly cords are routed internally within the arm to maintain the clean look of the installation. Ships pre-assembled for fast and easy installation.
What is VESA?
VESA (Video Electronics Standards Association) is a Flat Panel Monitor Physical Mounting Interface Standard (FPMPMI). Most manufacturers comply with this standardized and industry wide “hole pattern” on the back of their displays for mounting purposes. A typical VESA hole pattern for displays can be one of three sizes:
75 mm x 75 mm (75 mm = 3 inches)
100 mm x 100 mm (100mm = 4 inches)
200 mm x 200 mm (200 mm = 8 inches)
In order to assure mount compliance with your selected display please measure the vertical and horizontal center line distance between hole pattern. This measurement should conform to either of the dimensions described above. If the measurement is outside of these guide lines an alternative adaptor plate may be required. For assistance please call our sales department at 1-800-314-8955.
Note: Any non-VESA standard screen will require a custom PLP or LC series adapter plate. Please call us at 1-800-314-8955 if you require an adapter plate or if you have compatibility questions.
| Toll Free: 888-880-1659 (M-F 9am-6pm)
