Chief LCDA Series Non-Inverted LCD/DLP Projector Ceiling Mount

Install Guide / Tech Specs



Cross Reference Chart:

SPECIFICATIONS COMMON TO LCDA SERIES

Roll:
+/-5 degrees

Pitch :
+/-90 degrees

Yaw :
360 degrees

Color:
Black

Weight Capacity:
50 lbs.

Three Mounting Methods:
1. Flush Mount to suitable ceilings (Use CMA-250 Ceiling Mount Adapter)

2. Four 1/4" Threaded Rod (Threaded Rod not included)

3. 1 1/2" NPT Threaded Extension Column

FAQs COMMON TO LCDA SERIES

Q. How do I know which projectors will work with the LCDA Series?
A. The LCDA Series can be used for any projector that will fit within the maximum equipment size – refer to the dimension chart and diagram below.

Q. How do I know which LCDA mount to select?
A. Verify that your projector can be non-inverted. Find the model with the maximum equipment dimensions that best fit your projector dimensions.

Q. Do I need to order a projector bracket?
A. No projector bracket is needed with the LCDA Series. The projector rests on a tray and the mount adjusts around it for a secure fit.

Q. How much weight does the mount hold?
A. Each mount is custom designed to support the weight of the projector models specified. However, your ceiling must hold at least 5x the total weight of your installation.

Q. Do I need any additional accessories to install the LCDA?
A. The LCDA can be flush mounted to the ceiling by ordering the CMA-250 Ceiling Mount Adapter for a low-profile, simple installation. However, often times you will need to lower the projector from a structural, finished or suspended ceiling. For these common applications, you will want to order the appropriate accessories.

Q. If I use the LCDA with a Suspended Ceiling Kit, do I need an extension column?
A. Yes. Any length 1 1/2" NPT threaded extension column will work with Chief’s Suspended Ceiling Kits.