Welcome, Please Login.

  You are here: Home > Pivoting Wall Arm >

 
  Chief JWD-210 Dual Swing Arm Wall Mount
Chief JWD-210 Dual Swing Arm Wall Mount

 

Chief JWD-210 Dual Swing Arm Wall Mount

Our Price: $199.00

Seen this item for less?
Additional Discounts available for Education, Government, Churches, Resellers and Healthcare. Click here to sign up today!

Availability: Usually Ships in 24 Hours
Product Code: CHFJWD210P


Select Mount Color*: 		  

Qty:    
Description
 
Extended Depth From Wall: 20.375"

Compressed Depth From Wall: 2.6875"

Chief's JWD Series Dual Swing Arm Wall Mount provides a broad range of motion for viewing Medium Flat Panel Displays (26" to 40" screens) from multiple angles. The JWD Series extends over 20" out and folds in close to the wall for a low-profile appearance when not fully extended. VESA compliant with 100 x 100mm, 100 x 200 mm or 200 x 200 mm pattern. (custom interface brackets also available)

What is VESA? VESA (Video Electronics Standards Association) is a Flat Panel Monitor Physical Mounting Interface Standard (FPMPMI). Most manufacturers comply with this standardized and industry wide “hole pattern” on the back of their displays for mounting purposes. A typical VESA hole pattern for displays can be one of three sizes:

75 mm x 75 mm (75 mm = 3 inches)
100 mm x 100 mm (100mm = 4 inches)
200 mm x 200 mm (200 mm = 8 inches)

In order to assure mount compliance with your selected display please measure the vertical and horizontal center line distance between hole pattern. This measurement should conform to either of the dimensions described above. If the measurement is outside of these guide lines an alternative adaptor plate may be required. For assistance please call our sales department at 1-800-314-8955.

Note: Any non-VESA standard screen will require a custom PLP or LC series adapter plate. Please call us at 1-800-314-8955 if you require an adapter plate or if you have compatibility questions.
 
Features
  • Depth from the wall is 2.69"

  • VESA compliant with 100 x 100mm, 100 x 200 mm or 200 x 200 mm pattern. (custom interface brackets also available)

  • Gravity-Centered Tilt provided by Patent-pending Centris Technology (15 degrees in any direction)

  • Single Stud Wall mounting

  • Simple three-step installation

  • UL listed for proven strength

  • Max Extension: 20-3/8" (51.8 cm)

  • Pivot: 180 degrees

  • Dimensions (W x H x D): 12-1/8" x 14-11/16" x 2-11/16" (308 x 373 x 68 mm)

  • Weight Capacity: 75 lbs (34 kg)

  • Color: Black or Silver


 Share your knowledge of this product with other customers... Be the first to write a review.
  • [Valid RSS]
  • Mount Center Privacy Policy