FSD Under-Cabinet Swing-Down Mount

• Compatible with displays up to 18 lbs.
• VESA compliant (75 mm / 100 mm). Interface brackets available for non-VESA compliant displays.
• Easy installation. Attach mount to cabinet, lift and place display on mount, secure hardware
• Sleek, attractive design hides all hardware
• Exclusive user-friendly design allows display to be folded up at any rotation point.
• Easy to push up and pull down display with the exclusive one-way friction device reduces effort
• Low-profile depth 1.69" / 42.9 mm will keep mount hidden underneath most cabinets
• Cables remain hidden inside arm
• Height adjustment allows the best fit for multiple display sizes

Rotation:
Side to side rotation adjustment 220 degrees

Pitch Adjustment:
15 degrees up

Color:
Silver Metallic or Smooth Black

Weight Capacity:
18 lbs.
8.16 kg

FAQs COMMON TO FSD SERIES

Q. What is the maximum size display I can use with the FSD?
A. The maximum weight of the display must not exceed 18 lbs.

Q. How do I know if my display will fit under my cabinet?
A. Measure the total depth of the cabinet and then subtract 3/4". This will give you the maximum outside height dimension of the display (For a 12" deep cabinet a maximum display height of 11 1/4" is compatible). You may need to add up to 3/4" extra space for displays with control buttons on the top side of the housing.

Q. What does it mean to be VESA compliant?
A. VESA is a Flat Panel Monitor Physical Mounting Interface (FPMPMI) Standard. Manufacturers include this hole pattern on the back of their displays for mounting purposes. A VESA hole pattern can be one of two sizes: 75mm x 75mm or 100mm x 100mm. Chief's FSD-4100 fits VESA compliant displays. Chief also designs interface brackets for non-VESA compliant displays. If your display is not VESA compliant, a separate FSB interface bracket must be ordered. Refer to Chief's Small Flat Panel Cross-Reference Chart to determine the Chief model number you need to order.

Q. What if my display is not listed on the Cross-Reference Chart?
A. If your hole pattern does not reflect either of these standards, please contact Customer Service at 1.800.582.6480 (domestic) / 952.894.6280 (international) to determine if Chief has a model to fit your display. Chief is constantly designing brackets to fit new displays on the market.

1. Verify that your screen is VESA compliant (must order a separate FSB interface bracket for non-VESA compliant displays).
2. Verify that your display meets the weight capacity.